Contact | Find Us | Custom Quote

Save £100 off orders over £999 use code SAVE100

Irrigation Components

Irrigation systems consist of various components that work together to deliver water to plants efficiently. The specific components you choose depend on the type of irrigation system you're implementing (drip, sprinkler, soaker hose, etc.), the size of the area you're irrigating, and the types of plants you're watering. Here are some common irrigation components:

1. Water Source:

  • Main Water Supply: This is the source of water for your irrigation system. It could be a municipal water supply, a well, a water tank, or another water source.

2. Water Pump:

  • Pump (if needed): In some cases, especially for larger irrigation systems or systems drawing water from a well or tank, a pump may be required to pressurize and distribute water through the system.

3. Pipes and Tubing:

  • Mainline Pipes: These are the larger pipes that carry water from the water source to the different zones or areas of your garden.
  • Sub-main Pipes: Smaller pipes branching off the mainline, distributing water to specific zones.
  • Lateral Tubes or Drip Lines: In drip irrigation systems, these are the smaller tubes that deliver water directly to individual plants.

4. Valves:

  • Main Shut-off Valve: Controls the overall flow of water to the entire irrigation system.
  • Zone Valves: Control the flow of water to specific zones or sections of the garden. These are crucial for dividing the irrigation system into manageable parts.

5. Filters:

  • Screen or Disc Filters: These are used to remove debris and particles from the water, preventing clogging of emitters or nozzles in the system.

6. Pressure Regulators:

  • Pressure Regulator: Maintains consistent water pressure within the irrigation system. Different components may require different pressure levels.

7. Backflow Preventer:

  • Backflow Preventer: This is a device that prevents water from flowing back into the main water supply. It's essential to prevent contamination of the water source.

8. Controllers:

  • Irrigation Controller or Timer: Programs and automates the watering schedule. Controllers can be manual or digital, and some advanced models can be controlled remotely.

9. Sensors:

  • Rain Sensor: Automatically shuts off the irrigation system when it detects rain, preventing overwatering.
  • Soil Moisture Sensor: Measures soil moisture levels and triggers irrigation when the soil becomes dry.

10. Emitters or Nozzles:

  • Sprinkler Heads: Emit water in a spray pattern, suitable for larger areas.
  • Drip Emitters: Deliver water directly to the root zone of individual plants in a slow and controlled manner.
  • Soaker Hoses: Porous hoses that allow water to seep through, ideal for watering along rows of plants.

11. Micro-Irrigation Components:

  • Micro-Sprinklers or Micro-Sprayers: Similar to regular sprinklers but designed for smaller areas or pots.
  • Micro-Tubing: Small tubes used to connect micro-sprinklers or drip emitters to the mainline or lateral lines.

12. Fittings and Connectors:

  • Elbows, Tees, Couplings: Connect and redirect pipes and tubing.
  • Adapters and Reducers: Convert between different pipe or tubing sizes.
  • End Caps and Plugs: Seal the ends of pipes or tubing.


View as

Compare /3

Loading...